Temperature Control — Control Systems — Honeywell Cables
Windy City Wire manufactures U.S.-made SmartWire® low-voltage cable engineered for dependable performance in Honeywell temperature control systems and other building automation platforms. Whether you are running BACnet MS/TP, Lon/Echelon networks, or general Temp Control sensor and controller connections, our temperature control wire and cable selection is designed to support stable communication, clean terminations, and long service life in commercial and institutional environments.
Every SmartWire cable in this category is built for professional installers who need consistency on the job: plenum-rated constructions for air-handling spaces, shielded and non-shielded options for noise management, and conductor configurations commonly specified for RS-485 and other control circuits. SmartWire Glide Technology® lubrication is applied during manufacturing to reduce pulling friction by up to 70%, helping crews route cable faster through congested pathways without messy external lubricants.
Built for control networks
- Supports BACnet, Lon, and Echelon-based control architectures, including RS-485 segments common in Honeywell building systems.
- Low-capacitance shielded options help maintain signal integrity over longer runs and in electrically noisy environments.
- Plenum-rated (CMP) selections meet code requirements for air-handling spaces while delivering reliable, low-voltage Temp Control communications.
Options at a glance
- Available gauges: 24, 22, and 18 AWG
- Constructions: Shielded and Non-Shielded plenum options, plus TFN insulated choices for select 18 AWG applications
- Conductor color codes: Black/White, Black/Red, and White-Blue/Blue for straightforward identification during terminations
- Available lengths: 1000 ft and 2500 ft
- RoHS compliant designs
Why SmartWire for Temperature Control?
- Consistency across an entire project: matching gauge and shielding options simplify submittals and standardize installations across zones and floors.
- Time-saving handling: SmartWire Glide lubrication reduces pull tension and helps minimize rework during rough-in and trim-out.
- Application-focused performance: low-capacitance shielded pairs/twisted constructions are well-suited for BACnet MS/TP and Lon/Echelon control loops, and non-shielded plenum options cover short, noise-free runs.
- U.S.-manufactured quality: dependable materials, precise geometry, and tight tolerances for repeatable results in Temp Control applications.
Available constructions
Where these cables fit
- Honeywell temperature control networks using BACnet MS/TP or Lon/Echelon protocols
- Controller, sensor, and actuator wiring in commercial HVAC systems
- Plenum spaces and risers where CMP ratings and reliable signal performance are essential
How Windy City Wire adds value
Choosing SmartWire for your next Temp Control project gives your team a dependable, code-compliant product line that is easy to standardize across sites. With application-ready shielding choices, multiple gauges, clear conductor color codes, and SmartWire Glide lubrication for smooth installation, you can plan, pull, and terminate with confidence. Our temperature control wire and cable portfolio helps reduce installation time, support stable Bacnet and Lon communication, and keep your Honeywell systems running reliably from startup through maintenance.
Need help selecting a cable?
Our team can guide you to the right gauge, shielding, and plenum construction for your specific Bacnet or Lon/Echelon control network and site conditions.
Honeywell Temperature Control Cables for Reliable Building Automation
Windy City Wire supplies purpose-built temperature control wire and cable engineered for Honeywell building automation and HVAC controls, as well as other leading Temp Control platforms. From network trunks to device-level terminations, our constructions support signal integrity, code compliance, and consistent performance in demanding commercial environments.
Designed for today’s control networks
Where these cables fit in a Honeywell ecosystem—and beyond
Typical applications in HVAC and BAS
Industries and facilities served
Why choose Windy City Wire for Honeywell Temp Control projects
Available options at a glance
Selecting the right cable for Honeywell and multi‑vendor projects
Installation considerations that protect performance
Confidence across brands and protocols
Whether you are building out a Honeywell WEBs system, expanding an Alerton or Trane network, or integrating mixed platforms over Bacnet and Lon/Echelon, our temperature control wire and cable portfolio offers the flexibility and consistency needed to keep schedules on track and systems stable. With multiple gauges, shield configurations, and application‑specific constructions, you can standardize on a single source for Temp Control wiring across all project types.
Ready to specify
Choose the construction that aligns with your Honeywell or multi‑vendor BAS specification, then select the length that fits your rollout. Standard 1000 FT reels are available, and select items also come in 2500 FT for large‑scale deployments. For help matching wire to a particular controller, sensor, or network topology, contact our team for a recommendation based on your submittal.
Temperature Control — Control Systems — Honeywell Cables
Windy City Wire manufactures U.S.-made SmartWire® low-voltage cable engineered for dependable performance in Honeywell temperature control systems and other building automation platforms. Whether you are running BACnet MS/TP, Lon/Echelon networks, or general Temp Control sensor and controller connections, our temperature control wire and cable selection is designed to support stable communication, clean terminations, and long service life in commercial and institutional environments.
Temperature Control — Control Systems — Honeywell Cables
Windy City Wire manufactures U.S.-made SmartWire® low-voltage cable engineered for dependable performance in Honeywell temperature control systems and other building automation platforms. Whether you are running BACnet MS/TP, Lon/Echelon networks, or general Temp Control sensor and controller connections, our temperature control wire and cable selection is designed to support stable communication, clean terminations, and long service life in commercial and institutional environments.
Every SmartWire cable in this category is built for professional installers who need consistency on the job: plenum-rated constructions for air-handling spaces, shielded and non-shielded options for noise management, and conductor configurations commonly specified for RS-485 and other control circuits. SmartWire Glide Technology® lubrication is applied during manufacturing to reduce pulling friction by up to 70%, helping crews route cable faster through congested pathways without messy external lubricants.
Built for control networks
- Supports BACnet, Lon, and Echelon-based control architectures, including RS-485 segments common in Honeywell building systems.
- Low-capacitance shielded options help maintain signal integrity over longer runs and in electrically noisy environments.
- Plenum-rated (CMP) selections meet code requirements for air-handling spaces while delivering reliable, low-voltage Temp Control communications.
Options at a glance
- Available gauges: 24, 22, and 18 AWG
- Constructions: Shielded and Non-Shielded plenum options, plus TFN insulated choices for select 18 AWG applications
- Conductor color codes: Black/White, Black/Red, and White-Blue/Blue for straightforward identification during terminations
- Available lengths: 1000 ft and 2500 ft
- RoHS compliant designs
Why SmartWire for Temperature Control?
- Consistency across an entire project: matching gauge and shielding options simplify submittals and standardize installations across zones and floors.
- Time-saving handling: SmartWire Glide lubrication reduces pull tension and helps minimize rework during rough-in and trim-out.
- Application-focused performance: low-capacitance shielded pairs/twisted constructions are well-suited for BACnet MS/TP and Lon/Echelon control loops, and non-shielded plenum options cover short, noise-free runs.
- U.S.-manufactured quality: dependable materials, precise geometry, and tight tolerances for repeatable results in Temp Control applications.
Available constructions
Where these cables fit
- Honeywell temperature control networks using BACnet MS/TP or Lon/Echelon protocols
- Controller, sensor, and actuator wiring in commercial HVAC systems
- Plenum spaces and risers where CMP ratings and reliable signal performance are essential
How Windy City Wire adds value
Choosing SmartWire for your next Temp Control project gives your team a dependable, code-compliant product line that is easy to standardize across sites. With application-ready shielding choices, multiple gauges, clear conductor color codes, and SmartWire Glide lubrication for smooth installation, you can plan, pull, and terminate with confidence. Our temperature control wire and cable portfolio helps reduce installation time, support stable Bacnet and Lon communication, and keep your Honeywell systems running reliably from startup through maintenance.
Need help selecting a cable?
Our team can guide you to the right gauge, shielding, and plenum construction for your specific Bacnet or Lon/Echelon control network and site conditions.
Honeywell Temperature Control Cables for Reliable Building Automation
Windy City Wire supplies purpose-built temperature control wire and cable engineered for Honeywell building automation and HVAC controls, as well as other leading Temp Control platforms. From network trunks to device-level terminations, our constructions support signal integrity, code compliance, and consistent performance in demanding commercial environments.
Designed for today’s control networks
Where these cables fit in a Honeywell ecosystem—and beyond
Typical applications in HVAC and BAS
Industries and facilities served
Why choose Windy City Wire for Honeywell Temp Control projects
Available options at a glance
Selecting the right cable for Honeywell and multi‑vendor projects
Installation considerations that protect performance
Confidence across brands and protocols
Whether you are building out a Honeywell WEBs system, expanding an Alerton or Trane network, or integrating mixed platforms over Bacnet and Lon/Echelon, our temperature control wire and cable portfolio offers the flexibility and consistency needed to keep schedules on track and systems stable. With multiple gauges, shield configurations, and application‑specific constructions, you can standardize on a single source for Temp Control wiring across all project types.
Ready to specify
Choose the construction that aligns with your Honeywell or multi‑vendor BAS specification, then select the length that fits your rollout. Standard 1000 FT reels are available, and select items also come in 2500 FT for large‑scale deployments. For help matching wire to a particular controller, sensor, or network topology, contact our team for a recommendation based on your submittal.