Temperature Control Multi‑Pair Non‑Plenum Cables from Windy City Wire are built for dependable performance in commercial and industrial building automation systems, including HVAC, thermostats, VAV boxes, sensors, controllers, and RS‑485 networks (such as BACnet MS/TP and Modbus RTU). If you are searching for temperature control wire and cable that installs cleanly and maintains signal integrity across noisy mechanical rooms and riser spaces, our SmartWire solutions offer a practical, installer‑friendly choice for Temp Control applications.
Every cable in this category is part of our U.S.‑manufactured SmartWire product line. SmartWire is low‑voltage cable designed to help improve on‑site efficiency and consistency across projects. SmartWire Glide Technology is standard on these cables; this applied lubrication reduces friction during pulls by up to 70% to help speed installation, minimize rework, and protect cable jackets in tight pathways.
Where these temperature control wire and cable products fit best
Available constructions
Why choose Windy City Wire for Temp Control projects
Customer value summary
Windy City Wire helps integrators, contractors, and facility teams deliver reliable Temp Control systems with SmartWire multi‑pair non‑plenum options that balance noise rejection, pullability, and jobsite efficiency. With EPS shielding on each pair, color‑coded conductors, CMR compliance, and SmartWire Glide lubrication, our products and solutions are built to streamline installation while supporting long‑term system stability. When you need temperature control wire that installs efficiently and performs as specified, Windy City Wire is a dependable partner for your next project.
Temperature Control Multi-Pair Non-Plenum Cables from Windy City Wire are designed for dependable performance across a wide range of building automation and HVAC control applications. Built for riser and general building spaces where a plenum rating is not required, these cables give contractors and facility teams a straightforward, reliable way to connect controllers, sensors, actuators, and network devices in modern Temp Control systems.
Engineered as multi-pair, individually shielded temperature control wire and cable, this series helps reduce installation time by allowing multiple signals to be pulled with a single run while maintaining signal integrity and noise immunity between circuits. Typical uses include analog/monitoring signals, RS-485 networks, and low-voltage control lines common to commercial and industrial automation.
Where these cables fit in your building systems
Key advantages of Multi-Pair Non-Plenum for Temp Control
Signals and protocols this temperature control wire supports
Industries and facilities that benefit
Typical application examples
Product lineup at a glance
Selection and installation considerations
Whether you are wiring a new BAS network for a Trane or Honeywell system, updating an Alerton floor with added sensors, or standardizing control cabling across a multi-site portfolio, our multi-pair non-plenum temperature control wire provides a practical, code-compliant foundation. The combination of individually shielded pairs, riser rating, and consistent construction helps installers deliver dependable results on day one and simplifies service for the life of the system.
When you need temperature control wire that supports modern BAS networks and field devices, Windy City Wire delivers a balanced solution—built for clarity, noise resistance, and straightforward installation.
22 AWG.
Available conductor color codes include Black/Red, White/Green, Green/White, and Brown/Blue.
These cables use bare copper conductors. For solid vs. stranded construction details on a specific item, please contact Windy City Wire.
1,000 ft. At Windy City Wire, we manufacture and stock SmartWire Temperature Control wire in 1,000 ft length as our standard length.
They are packaged in our patented RackPack carton for efficient pulls and handling. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview
Temperature Control Multi‑Pair Non‑Plenum Cables from Windy City Wire are built for dependable performance in commercial and industrial building automation systems, including HVAC, thermostats, VAV boxes, sensors, controllers, and RS‑485 networks (such as BACnet MS/TP and Modbus RTU). If you are searching for temperature control wire and cable that installs cleanly and maintains signal integrity across noisy mechanical rooms and riser spaces, our SmartWire solutions offer a practical, installer‑friendly choice for Temp Control applications.
Every cable in this category is part of our U.S.‑manufactured SmartWire product line. SmartWire is low‑voltage cable designed to help improve on‑site efficiency and consistency across projects. SmartWire Glide Technology is standard on these cables; this applied lubrication reduces friction during pulls by up to 70% to help speed installation, minimize rework, and protect cable jackets in tight pathways.
Temperature Control Multi‑Pair Non‑Plenum Cables from Windy City Wire are built for dependable performance in commercial and industrial building automation systems, including HVAC, thermostats, VAV boxes, sensors, controllers, and RS‑485 networks (such as BACnet MS/TP and Modbus RTU). If you are searching for temperature control wire and cable that installs cleanly and maintains signal integrity across noisy mechanical rooms and riser spaces, our SmartWire solutions offer a practical, installer‑friendly choice for Temp Control applications.
Every cable in this category is part of our U.S.‑manufactured SmartWire product line. SmartWire is low‑voltage cable designed to help improve on‑site efficiency and consistency across projects. SmartWire Glide Technology is standard on these cables; this applied lubrication reduces friction during pulls by up to 70% to help speed installation, minimize rework, and protect cable jackets in tight pathways.
Where these temperature control wire and cable products fit best
Available constructions
Why choose Windy City Wire for Temp Control projects
Customer value summary
Windy City Wire helps integrators, contractors, and facility teams deliver reliable Temp Control systems with SmartWire multi‑pair non‑plenum options that balance noise rejection, pullability, and jobsite efficiency. With EPS shielding on each pair, color‑coded conductors, CMR compliance, and SmartWire Glide lubrication, our products and solutions are built to streamline installation while supporting long‑term system stability. When you need temperature control wire that installs efficiently and performs as specified, Windy City Wire is a dependable partner for your next project.
Temperature Control Multi-Pair Non-Plenum Cables from Windy City Wire are designed for dependable performance across a wide range of building automation and HVAC control applications. Built for riser and general building spaces where a plenum rating is not required, these cables give contractors and facility teams a straightforward, reliable way to connect controllers, sensors, actuators, and network devices in modern Temp Control systems.
Engineered as multi-pair, individually shielded temperature control wire and cable, this series helps reduce installation time by allowing multiple signals to be pulled with a single run while maintaining signal integrity and noise immunity between circuits. Typical uses include analog/monitoring signals, RS-485 networks, and low-voltage control lines common to commercial and industrial automation.
Where these cables fit in your building systems
Key advantages of Multi-Pair Non-Plenum for Temp Control
Signals and protocols this temperature control wire supports
Industries and facilities that benefit
Typical application examples
Product lineup at a glance
Selection and installation considerations
Whether you are wiring a new BAS network for a Trane or Honeywell system, updating an Alerton floor with added sensors, or standardizing control cabling across a multi-site portfolio, our multi-pair non-plenum temperature control wire provides a practical, code-compliant foundation. The combination of individually shielded pairs, riser rating, and consistent construction helps installers deliver dependable results on day one and simplifies service for the life of the system.
When you need temperature control wire that supports modern BAS networks and field devices, Windy City Wire delivers a balanced solution—built for clarity, noise resistance, and straightforward installation.
22 AWG.
Available conductor color codes include Black/Red, White/Green, Green/White, and Brown/Blue.
These cables use bare copper conductors. For solid vs. stranded construction details on a specific item, please contact Windy City Wire.
1,000 ft. At Windy City Wire, we manufacture and stock SmartWire Temperature Control wire in 1,000 ft length as our standard length.
They are packaged in our patented RackPack carton for efficient pulls and handling. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview