Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables

Summary: Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables

Outdoor COMPOSITE | Outdoor Water Warrior Wet Location Cables

Windy City Wire’s SmartWire Outdoor Water Warrior wet-location composites are purpose-built for professional integrators who need reliable outdoor wire and cable for security, access control, and building automation. These low-voltage products combine complementary functions in a single pull—helping reduce installation steps and simplify device terminations—while using materials designed for outdoor and wet environments. As indoor/outdoor Water Warrior cables, they support common field conditions such as moisture exposure and frequent handling without sacrificing performance.

Why choose SmartWire Outdoor Water Warrior composites for your next project?

• Low-voltage, wet-location constructions built for access control, electrified locking hardware, card readers, and edge devices at doors, gates, and perimeters.
• Composite designs reduce parallel pulls, conduit congestion, and on-site prep—streamlining installs for contractors and integrators.
• Shielding options (OAS/UNS/WBT) let you match noise environments and run lengths to the right cable design.
• SmartWire Glide lubrication is applied during manufacturing to reduce pull friction by up to 70% for smoother, faster installations.
• U.S.-manufactured SmartWire with available jacket colors and stripes to support identification standards across projects and service teams.

Built for real outdoor work

• Water Warrior wire and cable constructions use durable PVC insulation and jackets designed for use as outdoor cable in wet locations.
• Available as outdoor wire and cable solutions that align with common low-voltage power and signal requirements in commercial and industrial settings.
• Ideal where water resistant wire and cable is required for device drops, door frames, and exposed transition points.

Typical applications

• Access control: lock power, REX, request-to-enter, and status circuits
• Card readers and credentials devices
• Gate operators and perimeter control devices
• Low-voltage power and signaling to outdoor sensors and controllers

Product availability and options

• Lengths: 1000 FT standard; 500 FT also available
• Shielding: OAS (overall foil shield), UNS (unshielded), WBT (water-blocking tape) options
• Conductor color codes: Black/Red/White/Green; Black/Red, White/Green, Brown/Blue; Black/Red
• SmartWire jacket colors and stripes: standard and custom options available upon request

How our Outdoor Water Warrior composites add value

• Fewer pulls and terminations reduce crew time and help maintain consistent workmanship across doors and device locations.
• Shield where needed and keep it simple where you don’t—choose the right composite for each opening or run.
• Consistent, U.S.-manufactured SmartWire quality supports dependable performance from rough-in through closeout.

Available constructions

• 4-Element Composite: Unshielded composite for lock power and control runs in wet locations

Summary

Windy City Wire’s SmartWire Outdoor Water Warrior composites provide a dependable, installer-friendly path to outdoor cable deployments for access control and other low-voltage systems. By packaging the right power and signal combinations in a single cable and offering shielding choices, color coding, and SmartWire Glide pull performance, these indoor/outdoor Water Warrior cables help contractors finish faster with consistent results. If you’re seeking water warrior wire and cable solutions for wet locations that balance durability and ease of installation, SmartWire Outdoor Water Warrior is ready for your next project.

Solutions: Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables

Outdoor COMPOSITE | Outdoor Water Warrior Wet Location Cables

Windy City Wire’s Outdoor Water Warrior wet-location composite constructions are purpose-built for exterior security and low-voltage control at the building envelope and across the site. By combining power and data under a single jacket, this outdoor cable streamlines design and installation, reduces conduit fills, and helps ensure dependable performance in damp and wet environments. If you need outdoor wire and cable that stands up to moisture while supporting modern security and control protocols, our Water Warrior wire and cable line delivers a practical, job-ready solution for commercial and industrial projects.

Who uses these cables
Security integrators, electrical contractors, facility teams, and OEMs rely on these indoor/outdoor Water Warrior cables to standardize exterior openings, gates, and remote enclosures—simplifying pulls, terminations, and long-term maintenance across campuses and multi-site portfolios.

Built for exterior access control and perimeter systems
These composite constructions are engineered to support a complete door or gate opening with one pull. Typical configurations combine 18 AWG power conductors for electrified hardware with multiple 22 AWG shielded data pairs for credential readers and supervision—all within a single, wet-location rated outdoor cable. This makes it well-suited for:

• Exterior doors with electrified strikes or magnetic locks, card readers (Wiegand or OSDP/RS‑485), door position switches, and request-to-exit devices
• Perimeter gates and turnstiles: reader/keypad, loop detector control wiring, safety sensors, and lock/relay power
• Loading docks and service entrances that require both power for hardware and data/control runs back to controllers
• Outdoor cabinets and pedestals housing access controllers, power supplies, or I/O modules

Broader outdoor low-voltage applications

• Parking and revenue control: barrier arms, ticket dispensers, credential readers, and intercom triggers
• Emergency communication towers and call boxes: audio/control pairs with auxiliary low-voltage power
• Perimeter and campus safety systems: remote sensors, strobe/indicator control, relay outputs
• Building automation at the exterior: photo sensors, environmental sensors, relay control for lighting or shades
• Industrial and utility sites: pump houses, lift stations, and valve actuators where control and serial communications share a route exposed to moisture
• Transportation and large venues: toll booths, transit stations, airport curbside entries, stadium gates, and kiosks

Integration and signal compatibility
Outdoor Water Warrior wet-location composite designs support the mix of power and signaling commonly required at exterior openings and field devices:

• Reader/data protocols: Wiegand, OSDP/RS‑485, and other low-voltage serial or supervised circuits
• Dry contact, relay, and low-current power for locks, sensors, and indicators
• Multiple pairs allow separation of reader, door position, and REX/control wiring while sharing a single jacket

Performance in wet and noisy environments
For runs in outdoor conduit, exposed transition areas, or damp/wet enclosures, choose the shielding and construction that best matches the site conditions:

• OAS (Overall Aluminum Shield): Helps reject EMI/RFI near motors, gate operators, LED drivers, and radio equipment—ideal where data integrity is critical.
• UNS (Unshielded): A cost‑effective choice for shorter, less noise‑prone routes.
• WBT (Water‑Blocking Tape): Helps mitigate moisture migration along the cable in underground, splash-prone, or flood‑susceptible pathways.

Design details that save time in the field

• Composite power + data in one outdoor wire and cable reduces pulls, penetrations, and termination points
• Distinct conductor color coding supports faster identification and fewer errors during terminations (e.g., Black/Red/White/Green for power; Black/Red, White/Green, Brown/Blue for data pairs)
• Water resistant wire and cable construction supports reliable operation in wet-location pathways and enclosures

Lengths and options
To align with project staging and site size, cables are available in multiple lengths: 500 FT and 1000 FT. Select from available shielding types—OAS, UNS, and WBT—to match noise and moisture exposure. Typical composite configurations include 18‑4 for hardware power and 22 AWG multi‑pair for reader and control signaling, giving you the right balance of power delivery and data fidelity in a single outdoor cable.

Industries served

• Commercial offices and corporate campuses
• Healthcare and life sciences facilities
• Higher education, K‑12, and municipal buildings
• Industrial, warehousing, and logistics sites
• Data centers and critical infrastructure
• Retail, hospitality, entertainment venues, and stadiums
• Transportation hubs, parking facilities, and utilities

Why spec Windy City Wire for outdoor openings
Our Outdoor Water Warrior wire and cable portfolio focuses on practical jobsite gains: fewer cable pulls, dependable wet‑location performance, and clear conductor identification for clean terminations. For security integrators and electrical contractors, that means faster installations, consistent results across sites, and easier service over the life of the system. When the scope calls for rugged outdoor wire and cable that supports both power and data at the edge, Outdoor Water Warrior wet‑location composite cables are a straightforward choice.

Ready to standardize your next exterior opening or perimeter system? Specify Outdoor Water Warrior wet‑location composite designs to simplify installation and support long‑term reliability across your project.

Frequently Asked Questions: Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables

• Are these SmartWire Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables made with solid or stranded copper conductors?

  They are made with stranded copper conductors for flexibility and durability in outdoor, wet-location installations. Shielding options vary by construction and include OAS, UNS, and WBT.

• What lengths are these SmartWire Outdoor COMPOSITE | Outdoor Water Warrior® Wet Location Cables sold in?

  Windy City Wire manufactures and stocks SmartWire Outdoor wire in 1,000 ft length as our standard length. Select items in this category are also available in 500 ft lengths.

• How is your SmartWire low-voltage Outdoor wire cables sold on spools or in boxes?

  Our SmartWire Outdoor wire is packaged in our patented RackPack carton to streamline pulling and installation. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

• What are the main differences between RG59 and RG6 cables?

  Both are 75-ohm coax, but RG6 has a larger center conductor and dielectric, providing lower attenuation and better performance at higher frequencies and longer runs (often up to satellite/cable bands). RG59 has a smaller conductor, is more flexible, and is commonly used for baseband video/CCTV over shorter distances. RG6 typically features heavier shielding options (e.g., quad shield) for improved noise rejection.

• What are some distinctions between BAC NET, RS232 and RS485 Cables?

  RS-232 is single-ended, point-to-point, and best for short runs; it typically uses multi-conductor cable and does not support multi-drop networks. RS-485 is differential, supports multi-drop (bus) networks, favors a 120-ohm shielded twisted pair, and reaches much longer distances at lower data rates. BACnet MS/TP commonly runs on RS-485 physical layer cabling (shielded twisted pair), while BACnet/IP uses Ethernet cabling; select the cable based on the BACnet transport your system requires.

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you