JavaScript is required to use the Windy City Wire site

Petroleum Resistant Stranded Cables

About this category

Summary: Petroleum Resistant Stranded Cables

Petroleum Resistant Stranded Cables

Windy City Wire manufactures SmartWire® low-voltage cable solutions built to perform in petroleum environments. Our petroleum resistant stranded cables pair flexible construction with oil- and gasoline-resistant materials to support reliable control, signal, and power-limited circuits in applications such as fuel dispensing equipment, tank monitoring systems, sensors, and site controls. As a U.S. manufacturer based in Bolingbrook, IL, we focus on consistent quality, dependable availability, and product options that simplify installation and identification in the field.

Why choose SmartWire petroleum resistant stranded cable for your next project

  • Purpose-built for petroleum environments: Materials selected to resist petroleum-based fluids and everyday site contaminants while maintaining flexibility and durability.
  • Low-voltage performance with easy handling: Stranded conductors support faster pulls and routing in tight spaces; twisted pair construction helps maintain pair integrity for control and signal runs.
  • Installation efficiency: SmartWire Glide Technology® lubrication comes standard and reduces pulling friction by up to 70% to help shorten install times and minimize rework.
  • Right-size your specification: Available AWGs include 14 and 16 in non-shielded constructions with THHN or TFFN insulation, so you can align cable selection with circuit and conduit requirements.
  • Simplified identification: Choose from multiple jacket color/stripe combinations to standardize installations and speed troubleshooting across sites.
  • Length options: Available in 1000 FT and 2500 FT lengths to match project needs and reduce waste on large runs.
  • Made in the USA: SmartWire is manufactured in the United States for consistent quality and support.

Available options at a glance

  • Available AWGs: 14, 16
  • Shielding: Non-Shielded
  • Insulations: THHN, TFFN
  • Jacket color/stripe options: Yellow/Red, Black/Red, Black/White, Brown/White, Brown/Purple, Yellow/Brown, Yellow/Purple, Yellow/Blue, Orange/Yellow
  • Twist rate (where applicable): Approximately 10–12 twists per foot for stable lay and consistent pulls
  • Available lengths: 1000 FT, 2500 FT

How Windy City Wire delivers value

  • Fit-for-purpose constructions: Select from THHN or TFFN insulated, unshielded twisted pair designs that balance flexibility, chemical resistance, and mechanical durability.
  • Streamlined specification: Color and stripe options help standardize your low-voltage cable across fueling sites, service stations, and maintenance programs.
  • Dependable supply: U.S. manufacturing and a focused petroleum resistant cable line help keep your project schedules on track.
  • Support you can trust: Our team is available to help match cable construction, AWG, and color options to your specific low-voltage application needs.

Available constructions

  1. 14 AWG 1 Pair Stranded (19 Strand) THHN 600V: Unshielded twisted pair with an approximate 10–12 twists per foot for consistent lay and dependable handling in petroleum environments. A solid choice for control and signal circuits that benefit from a robust yet flexible THHN insulation system.
  2. 16 AWG 1 Pair Stranded TFFN 600V: Unshielded twisted pair designed for flexible routing and tight bends where a smaller gauge is appropriate. TFFN insulation provides durable, petroleum resistant performance for power-limited and control applications.

Put SmartWire to work on your next petroleum project

When you need petroleum resistant stranded cable that is easy to install, easy to identify, and built for low-voltage performance, SmartWire delivers. Contact Windy City Wire to discuss AWG selection, insulation type, and jacket color options to align with your specification and site standards.

Solutions: Petroleum Resistant Stranded Cables

Petroleum-Resistant Stranded Cables for Low-Voltage Control, Monitoring, and Safety

Windy City Wire petroleum-resistant stranded cables are designed for low-voltage control, signaling, and instrumentation in locations where gasoline, diesel, oils, and common hydrocarbons are present. Built around flexible stranded conductors with a tightly twisted 1-pair design (10–12 twists per foot), these cables deliver dependable signal integrity without shielding while standing up to petroleum exposure across a wide range of petroleum applications and industries.

Where these cables are used

  • Retail fueling/forecourt systems – Submersible turbine pump (STP) control, dispenser control signals, emergency stop circuits, interlocks, relay coil control, valve actuation, and contact closures.
  • Automatic tank gauging (ATG) – Level probes, water detection, temperature sensing, and remote annunciation circuits for underground and aboveground storage tanks.
  • Leak detection and environmental monitoring – Sump and interstitial sensors, line leak detection, vapor recovery controls, and alarm loops.
  • Lighting and controls – Canopy lighting control relays, photocell/lighting contactor control, timeclock and automation tie-ins.
  • Security and facility systems – Low-voltage alarm loops, door contacts, gate access controls, and notification devices in petroleum-exposed areas.
  • Process and instrumentation – 4–20 mA signals, discrete I/O, and RS-485/serial control between controllers, PLCs, sensors, and actuators in petroleum equipment skids.
  • Bulk fuel, fleet, and terminal operations – Pump control, valve monitoring, and safety interlocks in bulk plants, cardlock/fleet fueling sites, and terminal transfer equipment.
  • Generator and day-tank fuel systems – Solenoid valves, level sensors, and control loops for diesel day tanks and transfer pumps.
  • Vehicle service and car wash areas – Control and sensor wiring near lubricants and cleaning chemicals where petroleum resistance is beneficial.
  • Marine and aviation fueling – Control and monitoring circuits at marinas and airport ground fueling where hydrocarbon exposure is common.

Why petroleum-resistant stranded cables

  • Petroleum resistance where it counts – THHN, TFN, and TFFN constructions include a robust nylon jacket that helps resist gasoline, diesel, oils, and many solvents typically present at fueling sites and maintenance facilities.
  • Reliable low-voltage performance – Twisted 1-pair conductors (10–12 TPF) help minimize crosstalk and noise for control and instrumentation circuits without the added cost of shielding.
  • Flexible installation – Stranded (19-strand) copper offers easier routing and terminations in conduits, panels, and equipment enclosures compared to solid conductors.
  • 600-volt control and signal circuits – Suitable for a wide range of low-voltage control wiring scenarios where a 600 V rating is required.

Choosing the right insulation for the job

  • THHN petroleum-resistant wire – Commonly used for control and signal wiring in conduit and equipment enclosures at fueling sites and industrial petroleum areas. A dependable choice for general-purpose control circuits exposed to oils and fuels.
  • TFFN petroleum-resistant wire – Thin-wall, flexible construction is well-suited for tighter spaces, fixture/control wiring, and shorter conduit runs where added flexibility and chemical resistance are valuable.
  • TFN petroleum-resistant wire – Similar to TFFN with a thin-wall profile; used for compact routing of low-voltage control and instrumentation where petroleum resistance is important.

Typical systems and integrations

  • Forecourt automation – Connect controllers, sensors, relay panels, and emergency shutoff devices involved in dispenser and pump operations.
  • ATG and leak monitoring – Wire float trees, water probes, overfill prevention indicators, and remote alarm panels back to the monitoring console.
  • SCADA/PLC and remote I/O – Carry low-current signals for process feedback and interlocks between skids, panels, and control rooms in fueling and lube operations.
  • Safety and compliance circuits – Support interlocks, E-stop loops, alarm relays, and notification devices tied to site safety systems.

Available options in this category

  • AWG sizes: 14 AWG and 16 AWG to match common control and instrumentation needs and run lengths.
  • Insulations: THHN and TFFN petroleum-resistant constructions for chemical resistance in hydrocarbon environments.
  • Shielding: Non-shielded, twisted-pair design to balance noise performance and cost for most control circuits.
  • Conductor/jacket color options: Yellow/Red, Black/Red, Black/White, Brown/White, Brown/Purple, Yellow/Brown, Yellow/Purple, Yellow/Blue, Orange/Yellow to simplify circuit identification across complex installations.
  • Lengths: 1000 FT and 2500 FT to suit project scale and site layout.

Application guidance

  1. Select 14 AWG for longer runs or where slightly lower voltage drop is desired; choose 16 AWG for shorter control and sensor circuits.
  2. Use THHN for versatile control wiring in conduit where abrasion and chemical resistance are needed; choose TFFN when flexibility and a thinner wall help in tighter spaces.
  3. Leverage the twisted 1-pair construction for stable 4–20 mA loops, RS-485 signaling, relay control, and dry contact circuits in petroleum areas.
  4. Confirm system voltage, environmental conditions, and local code requirements for each installation and follow equipment manufacturer recommendations.

Support for petroleum professionals

Whether you are wiring retail fueling stations, fleet depots, bulk plants, or integrating ATG and leak detection systems, Windy City Wire petroleum-resistant stranded cables provide dependable low-voltage performance where hydrocarbon exposure is expected. Contact our team for help with wire selection, color coding strategies, and sizing for your specific control, monitoring, and safety circuits.

Frequently Asked Questions: Petroleum Resistant Stranded Cables

  • What AWG conductors are available with these SmartWire Petroleum Resistant Stranded cables?

    14 AWG and 16 AWG 1-pair stranded copper options are available.

  • What other colors are these SmartWire Petroleum Resistant Stranded cables available in?

    In addition to Red/Black twisted, available color combinations include: Yellow/Red, Black/Red, Black/White, Brown/White, Brown/Purple, Yellow/Brown, Yellow/Purple, Yellow/Blue, and Orange/Yellow.

  • Stranded copper. These petroleum-resistant cables use flexible stranded conductors (unshielded) for easier pulling and routing.

  • What lengths are these SmartWire Petroleum Resistant Stranded cables sold in?

    Windy City Wire manufactures and stocks SmartWire Petroleum in 1,000 ft as our standard length. This cable is also available in 2,500 ft lengths.

  • How is your SmartWire low-voltage Petroleum cables sold on spools or in boxes?

    Our SmartWire Petroleum Wire is packaged in our patented RackPack carton for faster, safer pulls and reduced labor. Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

  • What is the main difference between THHN, TFFN, and TFN Petroleum wires?

    THHN: Thermoplastic High Heat-Resistant Nylon. PVC insulation with a nylon jacket, 600 V, typically 90°C dry. Common for building wire in conduit and raceways where durability and chemical resistance (including petroleum exposure) are needed.
    TFFN: Thermoplastic Flexible Fixture Nylon. Similar materials but in a flexible, thinner-wall construction, 600 V, typically 90°C dry. Stranded for flexibility with a smaller OD—ideal for control panels, machine tools, and tight conduit runs.
    TFN: Thermoplastic Fixture Nylon. 600 V, typically 90°C dry. Fixture wire similar to TFFN but generally less flexible (often solid or stiffer construction), used in lighting fixtures and control circuits where flexibility is less critical.
    All three use a nylon jacket that enhances abrasion and chemical resistance; selection is typically driven by flexibility needs, bend radius, and space constraints. Always verify local code and application requirements.

Summary: Petroleum Resistant Stranded Cables

Petroleum Resistant Stranded Cables

Windy City Wire manufactures SmartWire® low-voltage cable solutions built to perform in petroleum environments. Our petroleum resistant stranded cables pair flexible construction with oil- and gasoline-resistant materials to support reliable control, signal, and power-limited circuits in applications such as fuel dispensing equipment, tank monitoring systems, sensors, and site controls. As a U.S. manufacturer based in Bolingbrook, IL, we focus on consistent quality, dependable availability, and product options that simplify installation and identification in the field.

Tip: Use the product search in our header to find additional products not featured in this catalog
Updating products…